Darkglass Microtubes B7K VS Overdrive/Distortion

3 790 kr

Microtubes B7K Overdrive/Distortion

Tillgänglig i butik

Artikelnr: DG-MTB7K Kategori: Tagg: Brand:

Beskrivning

Microtubes B7K Overdrive/Distortion

Spec

Level

Sets the volume of the overdriven signal.
Drive

Sets the amount of saturation in the overdriven signal.
Blend

Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.
Grunt Switch

Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.
Attack Switch

Sets the amount of treble content to saturate: The "Boost" setting emphasizes the treble content extra clarity and presence. The "Flat" position leaves this register untouched while the "Cut" position will reduce the amount of high frequencies being saturated.

This new addition helps to keep the treble portion of the signal under control, specially useful when playing with new strings and/or cabinets with tweeters!
Low

+-12dB @ 100Hz
Low Mid

+-12dB @ 1kHz
Hi Mid

+-12dB @ 2.8kHz
Treble

+-12dB @ 5kHz
Direct Output

A balanced version of the ¼? output, useful for running into PA?s or studio mixing consoles.
DIMENSIONS

12×10.7 cm (4.72×4.21 in)
WARNING

The Microtubes B7K has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.

Länk till tillverkaren

Mer information

Vikt 500 g

Recensioner

Det finns inga produktrecensioner än.

Bli först med att recensera “Darkglass Microtubes B7K VS Overdrive/Distortion”

E-postadressen publiceras inte. Obligatoriska fält är märkta *